阻燃MDF胶合板,而不是通过后的加工和生产,但将被添加到以某种方式在生产纤维的阻燃剂,所以,从外部向火力均匀板不同。早期阻燃中密度纤维板胶混合成的生产(还是喜欢制作公司),是一个简单的方法来有负面影响上胶,物理板和机械性能。储存和使用过程中会有一个防潮性差,破获分层单板,油漆起泡,握钉力差的现象。
“火盾”防火板,首先添加一个过程产生粉末,消防(火焰是该公司的专有技术,产品)通过,是补充纤维管的设备,风管采用阻燃阻燃纤维混纺,然后按董事会持有。的金额增值阻燃,阻燃效果不好的决定。
耐板,红色的习惯。耐板制造商知道,红色染料逐渐通过高压喷嘴注入管,火不相关。耐板是正常的颜色,颜色的深浅有没有做阻燃的效果。市场一直声称,越红的防火板,纯属误导。
面密度是指每单位体积的重量,例如,共同板720的密度,体重720磅每立方板。耐板制造商显然是不一样的密度不强。板有重,高密度的,但水是非常严重的肿胀,强度显着降低,因为所用的阻燃剂的生产质量差,以补偿增加体积的大小,缺乏。有些人觉得板不重,但电路板的强度优良,不易变形或损坏。因此,功率密度不一定好。必须正确理解,密度适合使用,电源应该会更好。
如何确定持久板是好还是坏?建议感人,两个燃烧,捏三,四盏灯。提及手摸板表面光滑。
两个用打火机烧,观测时间,看看是否有没有暗火烧毁,用刀子切一个小酒吧,并可以与普通板材相比。三捏,是使用核心钉板,感觉硬或软,再用钉板表面工地附近的对捏观察其表面层容易剥落。四灯是一小部分的样品,在冷水中浸泡24小时,以观察厚度增加多少。这个是最重要的。  

Flame retardant board manufacturer with your board know
Unlike Flame retardant MDF plywood, not by post-processing and production, but will be added to the flame retardants in some way in the production of fibers, so that from the outside to the fire uniform plate. Early Flame retardant MDF glue mixed into the production (still like the production company), is an easy way to have a negative impact on the glue, making physical plates and mechanical performance. Storage and use of the process there will be a poor moisture resistance, stratified veneer cracked off, paint blistering and poor nail holding power of the phenomenon.
"Fire Shield" fireproof board, first add a process for producing powder, fire (flame is the company's proprietary technology products) through a device that is added to the fiber pipe, wind pipe uses flame retardant fiber blend, and then pressing the board to hold. The amount of added fire retardant, flame retardant effects of bad decisions.
Resistant boards made of red habit. Resistant board manufacturers know that red dye gradually through a high pressure spray nozzle is injected into the pipe, and the fire is not related. Resistant board is normal color, depth of color has nothing to do with the effect of flame retardant. The market has been claimed, the more red fireproof board, purely misleading.
Sheet density refers to the weight per unit volume, for example, the density of common plate 720, is weighing 720 pounds per cubic plate. Resistant board manufacturers obviously not the same density is not strong. Some boards hold the heavy, high density, but the water is very serious swelling, strength was significantly reduced, because the flame retardants used in the production of poor quality, in order to compensate for the lack of increase in volume due to the size. Some feel the board is not heavy, but the strength of the board is excellent, easily deformed or damaged. So the power density is not necessarily good. Must be understood correctly, density suitable for use, the power should be better.
How to determine the lasting board is good or bad? Proposal touching, two burning, pinching three, four lights. Mentioned that hand Moban smooth surface.
Two burned, cut with a knife is a small bar with a lighter burning, observation time off to see if there is no fire dark, and can be compared with ordinary plates. Three pinch, is to use a core nail board, feels hard or soft, reuse nail plate surface near the site against pinching to observe the surface layer easily peeled. Four lights is a small part of the sample to soak in cold water for 24 hours to observe how much the thickness increases. This one is the most important.